Jump to content

Spaghetti

Members
  • Posts

    219
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by Spaghetti

  1. My take is that as one progress towards fast advanced/expert level it's better to switch to take offs. It is good to run a street tire up to a point and develop a feeling for grip or cold tires. But when the pace increases does it makes sense to run a tire that is not designed for performance riding?

     

    Some clues:

     

    - Manifacturers do not reccomend or advertise Q3 for track use (the Dunlop tires web page now shows Q3 for both street and track, but there are other tires reccomended for 100% track use)

    - CSS coaches use take offs

    - The warmup time required for Q3s over the first couple of laps is not very safe in an expert group session

  2. I'm assuming you're having this problem on hard braking on the straight at high speed. I have a similar problem, shifting too much forward, and still working on it. Other than locking the tank with your thighs, rise your upper body full up when you start braking and let the wind push you back. Also use your right foot against the foot peg for some extra back-force.

     

    post-24108-0-79885000-1442664686_thumb.jpgpost-24108-0-27025800-1442664784_thumb.jpg

  3. Yes, there is some throttle play but the crash happens a half-second after the correction. I'm a bit off the apex/kerb, but does off line mean crash? All previous laps go through the same off-line. I'm still not 100% clear what happened.

     

    As for the shifting, I remember hitting a false neutral on the straight, it happened to me a few other times. I don't have a quick shifter and try to use as little clutch as possible. I'm sure if I pull the clutch full-in and apply more pressure on the shifter it doesn't happen.

     

    The other late downshift @rchase noticed is more interesting: it happens often to me in turn 1. This is the only point where I can pass 2/3 slower bikes at the time because they brake earlier, but by focusing on braking and taking the (very) inside line I can't make it to the downshift on time before the turn. It got so bad that I got used to downshift after the turn every other lap. I don't like it, I'd much rather enter turn 1 in second gear, but I've figured it's safer for the other bikes to see me well on the straight than attempt passes in the other corners, especially if I have multiple slower bikes in front of me.

  4. So after reading @Drloannis comments about the as200v I had to try one. This is a video using the same mount than the others with an adapter gopro-to-sony. Few comments:

     

    - stabilizer works very well at low speed, after 50mph I don't see any improvement compared to gopro

    - picture quality is excellent on the as200

    - the wind noise reduction filter cuts the engine sound so avoid

    - the mount I'm using has a hard rubber base which might wobble the camera, I'll have to try a rigid plastic mount

     

    https://youtu.be/slYixXCrdkQ

  5. Interesting, good job khp. All Moto2 bikes have the same CBR600RR engine. I believe there are only two frames available, and all bikes are prepared by the same company in Spain. Rossi tried Ducati, Hayden has won a championship and now is at the end of the pack without Honda.

     

    I think the conclusion is that bike development is critical, more so than rider's ability. The reason why there seems to always be two teams battling in the top category could be that with only one team racing the season becomes unwatchable, like this year WSB. So the organization is prompted to shuffle rules a bit after each season that sees a one-team dominance.

  6. Your upper body looks too close to the tank and upright. In general you want to avoid pressing the front of the tank with your upperbody to limit body-tank shocks on the bike. You do want to lock your outside tight against the tank of course, that should be your main contact patch. But I know with Ducati it's different because of the tank shape. You can see that clearly in WSB, they ride very close to the tank.

     

    With that lean angle I would also open the inside leg a bit more and drag the knee to have a max lean angle reference point.

  7. I have a GoPro and found out that the shorter the bracket, I get less vibration, which is logic. Even if I put it on the tank cover which is not solid and it does vibrate I have more than acceptable results even in very bumpy tracks.

     

    Yes, thanks for the tip. I figured the tail fairing has more shaking leverage than the triple-clamp, similar to what you say for the mounting bracket.

    Nice sound work, what camera and software did you use for the lap time/tracking layout?

    I thought all action-cams have hardware stabilization. Is it Sony better than Gopro at this?

×
×
  • Create New...